Configuration menu
TCU700 must be in comfort mode prior to
configuration.
Press the right hand button (
) once if
the unit is in setback, frost protection or stop
modes.
Press the right hand button (
) and
hold in for at least five seconds to enter the
configuration menu.
Scroll up and down with the arrow keys:
Confirm choices with the right hand button
(
)
Press the left hand button (
) to return
to normal operation.
MENU
RECEIVERS
EC00
KEYLOCK
SETTINGS
SELECT
NOBO CONTROLS
Room: +0°C
NOBO CONTROLS
Configuring the receivers
1. Turn all heaters (receivers) OFF with the
switch on the heater.
2. Select ‘RECEIVERS’ in configuration
menu. Confirm that the existing receivers are
to be deleted by pressing ‘SELECT’. TC700
will now start to search for receivers.
3. Turn the first receiver (heater) on. TCU700
will show that 01 receivers have been regis-
tered and the serial number will appear on the
display.
4. Turn on each receiver in turn as in Point 3,
until all receivers have been registered. The
TCU700 display will show the number of re
-
ceivers found and the serial number of the last
registered receiver.
5. Press ‘OK’ to confirm the number of receiv
-
ers and finish the search.
If the number of receivers needs to be changed,
a new search must be carried out and the cor-
rect number of receivers re-entered.
