NOBOCOOL Orion 700, User Manual

Page: 4 / 31

About Orion 700 Getting Started
Installation and activation
This illustration is a schematic of a
typical installation which should be
carried out by a qualified electrician
and all wiring and connections must
comply with the current edition of the IEE Wiring Regulations. (UK only)
please check regional country electrical industry regulations.
Installation
The Orion 700 can be fixed to the wall by means of two screws. These
have to be screwed into the wall leaving 3mm from the head to the wall.
The two screws are inserted through the holes on the rear (labelled A to
the right), and the product is pulled downwards securing it in place.
In the Orion 700 packaging you will find a guide that will help you with
spacing the two screws correctly.
How does the Orion 700 work?
The Orion 700 is a Digital Programmer, which can control the following
systems via the appropriate wireless RECEIVER(s):
• Your electric central heating
• Your electric water heating
• Your electric towel rails
• Your ‘Plug-in’ lighting
• Other electrical appliances
You can programme according to your own needs. With the Orion 700
you can control the amount of electricity you consume in response to
factors like working hours and vacations. In this way you can save money,
and the environment, without any reduction of your home comfort.
Many other electrical appliances can be controlled, only your own
imagination limits the use of your Orion 700. Automatic control of your
lighting, your radio, your coffee machine can all be achieved by using
the optional RCE 700 ‘Plug-in’ (note optional extra) adaptor.
Over the forthcoming pages you will be shown how to
programme your Orion 700. In the event that the Orion 700 in
your home has already been programmed either by another
party or previous owners then please refer first to the section
entitled ‘Re-programming your Orion 700’ on page 17
4
In
tr
o
d
u
c
tio
n
to
y
o
u
r
O
rio
n
7
0
0
1
A