OPERATION
Typhoon
t
16B (10–03)
7
3.
Remove two unused squeegee mounting screws
from bottom of machine.
4.
Install squeegee mounting bracket as shown.
Secure with screw and washers that you removed
(Figure 3).
FIG. 3
5.
Fasten squeegee bracket to mounting bracket.
Use two (2) clevis and cotter pins provided
(Figure 4).
FIG. 4
6.
Stand machine upright.
7.
Insert spacer through hole in pedal then position
pedal between two holes in squeegee bracket.
Secure with hardware provided (Figure 5).
FIG. 5
8.
Slide pedal between the two mounting arms on
back of machine. Align and insert clevis pin
through arms and slot in pedal, secure with cotter
pin (Figure 6).
FIG. 6
9.
Attach squeegee assembly to bracket as shown
and secure with two thumb screws (Figure 7).
FIG. 7
10. Connect the 1090 mm (43 in) vacuum hose to the
squeegee assembly and to cover snout (Figure 8).
FIG. 8
