OPERATION
22
Speed Scrub 2001HD (09--04)
TROUBLE SHOOTING --continued
PROBLEM
CAUSE
SOLUTION
Poor water pick up.
Recovery tank is full.
Empty recovery tank.
Ball float shut--off screen inside recov-
ery tank is clogged.
Remove screen and clean.
Squeegee is clogged with debris.
Clean squeegee.
Squeegee blades are worn.
Replace squeegee blades.
Squeegee thumbscrews are loose.
Tighten thumbscrews.
Vacuum hose connections are loose
or hose has a hole.
Push hose cuffs firmly on connections.
Replace hose if damaged.
Vacuum hose is clogged with debris.
Remove clogged debris.
Recovery tank inlet hole is obstructed. Empty recovery tank and tilt tank side-
ways to access inlet hole, remove
obstruction.
Tank gasket is defective.
Replace gasket.
Drain hose cap is loose.
Tighten drain cap.
Recovery tank lid is loose.
Tighten lid.
Vacuum motor is loose.
Contact Service Center.
Battery charge level is low.
Charge batteries. Do not run machine
when battery meter is in the red zone.
Safety lights do not work.
Flasher is burned out.
Contact Service Center.
FaST Model: FaST System does
not operate or operate correctly.
FaST system switch is not turned on.
Turn on FaST system switch.
FaST--PAK supply hose not connected Connect supply hose.
FaST circuit breaker has tripped.
Determine cause and reset the 10A
circuit breaker button.
Clogged FaST--PAK supply hose or
connectors.
Soak in warm water to unclog.
Empty FaST--PAK carton.
Replace FaST PAK carton.
Kink in FaST--PAK supply hose.
Undo hose kink.
Clogged FaST solution system.
Contact Service Center.
Faulty FaST system on/off switch.
Contact Service Center.
Faulty pump.
Contact Service Center.
Clogged solution tank filter.
Drain solution tank. Remove solution
tank filter, clean and reinstall.
