68
Tail light switch is a single gear which controls on&off of the light. Pull switch up, light open;
push down, light off.
4. Control
(1) Ssteering wheel
①
and steering wheel handlebar
②
Steering wheel operation is traditional: steering wheel turn right, vehicle move right; steering
wheel turn left,vehicle move left.There is steering wheel at backside of forklift to make backside of
forklift swing toward outside when turning.
When turning, catch steering wheel by left hand and right hand on steering wheel or control
handle of multiway valve.
Both hydraulic steering system and steering wheel tilting device are standard equipment of
forklift.
·According to driver seat to adjust steering wheel to optimum angle.
·Lock steering pipe by tilting handle after adjusting steering wheel tilting angle.
(2) Horn button
④
Push down rubber cover located in the center of steering wheel to make a buzzing sound.
Even when ignition key is turned off,the horn can also sound.
(3) Direction switch handle
⑤
Indicate travelling direction
Travel forward (F): Push forward handle and step down accelerating paddle
Travel backward (R): Pull backward handle and step down accelerating paddle
When parking forklift,direction switch handle should be put in neutral position(N).
