67
2. Instrument unit
see figure 2.4 Electrical system
（
page 30
）
。
3. Switches
（
1
）
Emergency stop button
When emergency, press red mushroom-head button down to cut off
power to stop function of traveling, turning, lifting. To resume the
function,rotate the botton according to the arrowhead indication.
(2)Key switch
key can turn on or turn off controlling power
Turn off (0FF): In this position,power is cut off and key can be inserted
and pulled out
Turn on (0N): Turn forward from off position,switch is turned on,forklift
starts up.
·Do not turn on ignition key and step accelerator down
simultaneously.
·Take off key to prevent unqualified operating when get off forklift.
·Take off key when charging or parking to prevent unqualified operating.
（
3
）
Switch unit
Switch unit is combined by direction switch,steering switch and big and small light switch.
1- direction switch
2- steering switch 3- big and small light switch
Direction switch controls travelling direction and delivers signal to instrument to display. Push
handle forward,vehicle travel forward,and pull handle backward,vehicle travel backward. Neutral
position is vacancy. When handle is on backward,back-up light and caution light will open,back
buzzer has sound.
Steering lisht shows rotation direction of forklift,when handle is on turning position,steering
light will blink.
push forward
left steering light is bright
middle
neutral
pull backward
right steering light is bright
Big and small lights switch control relevant lights. Small light will open when rotate to the first
gear,both big and small lights will open when rotate to the second gear.
gear
light
OFF
first
gear
second
gear
width light
×
○
○
tail light
×
○
○
fore light
×
×
○
○: lightening ×: blanking
（
4
）
Rear big light switch
Emergency switch
