Shredders
10. - Maintenance and storage
61
TBE GBseries 102
JN070AGB B
10.3.3 Oil change
The side angle gearbox
Before draining oil, operate the machine for a
few minutes so that the oil warms up.
The angle gearbox is lubricated with extreme-pressure gear oil with viscosity grade 80W90 and API
grade GL5.
- TBE192 GB: 1.1 L (0.23 US gal).
- TBE222 GB: 1.1 L (0.23 US gal).
- TBE242 GB: 1.8 L (0.32 US gal).
When refilling it is recommended to use:
For normal use:
- A mineral base oil with viscosity grade SAE 80W90 or 85W140 and API grade GL5 (80W90 or
85W140).
For intensive use:
-
A synthetic base oil, type PAO (Poly-Alpha-Olefins) with a viscosity grade equivalent to
SAE 80W90 or 85W140 and API grade GL5 (75W90)
.
- Remove draining/filling plug (1).
- Use an oil syringe to drain the gearbox.
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
- Check the oil level:
• The oil level must reach lower part of level plug
hole.
- Clean and reinstall filler plug (1) and its washer.
Replace it if necessary.
1
1
