Shredders
50
8. - Instructions for work
TBE GBseries 102
JN070AGB B
The rounded skids improve crosswise machine
gliding with regards to the direction of travel.
- Proceed the same way on the other side.
- Check that the 2 skids are set identically.
- Slightly lift the machine from the ground.
- Loosen bolts (1).
- Remove screw (2).
- Position work skid in hole corresponding to the
required setting.
- Reinstall and tighten screw (2)
• Torque : 21 daNm (155 lbf ft).
- Tighten screw (1)
• Torque : 5 daNm (37 lbf ft).
2
1
1
Relations between the working height and the
skid position:
- Hole (1) = 20 mm (0.8’’).
- Hole (2) = 30 mm (1.2’’).
- Hole (3) = 50 mm (2’’).
1
2
3
