REVERSE OSMOSIS SYSTEMS RO 4... /E /EL - INSTRUCTIONS MANUAL
s.r.l.Milano - ITALY
Page 13 of 25
ro4e_mi-r10.doc -
r. 10
9. push the button
OK
to confirm (save) the modifications
10. proceed with other modifications for other parameters or push the button
ESC
to quit the
modification menu.
11. push the button
ESC
to go back to the visualization of service
NOTES :
•
during modification operations the normal current service is NOT interrupted
•
In modifications menu, related to
timers
, the digits visualized on the line
(marked as
Ta
) underneath the one on the time settings, marked as
T
, (
TH
and
TL
for alternation timers) indicate the status of the running counting of the time
of the selected
timer
•
the time bases are :
s = seconds (00,00 ÷ 99,95)
m = minutes (00:00 ÷ 99m:59s)
h = hours (00:00 ÷ 99h:59m)
•
symbols related to days of week :
M
o
Tu We Th Fr Sa Su
Monday
Tuesday
Wednesday
Thursday
Friday Saturday Sunday
5.2.5. How to use the function buttons of the programmer
The 4 buttons
can have special functions if enabled by the programmer for these
purposes.
Proceed as follows to use them:
•
push several times the button
until the notice
ESC+C…
is visualized on the display.
•
push and keep pushed the button
ESC
and immediately after that the desired function
button (
)
WARNING : by pushing the button
ESC
and
not
the function button within 2 seconds, the
display skips to the visualization of modification menu; release and then push
again the button
ESC
to go back to visualization
ESC+C…
5.2.6. How to set parameters switch (ON/OFF)
Proceed as follows to make any modifications of the parameters allowing only ON/OFF
selection.
1. push the button
ESC
2. push several times the button
until the pointer
>
indicates "set param"
3. push the button
OK
.
4. push several times the button
until the required parameter (B74 or other) is visualized.
5. push the button
OK
, the pointer blinks on the notice "switch"
6. push the button
to change selection between ON and OFF
7. push the button
OK
to save/confirm the modifications.
8. proceed with other modifications, if any, or push the button
ESC
to quit the modification
menu.
9. push the button
ESC
to go back to the visualization of service
