5 Operation
5.6 Scrolling function
5.6.1 Automatic scroll
Every 10 seconds the meter will display the next programmed data page (depending on the setting).
5.6.2 Change scrolling time by button
•
Scroll with the buttons to Program mode 2.
•
Hold the right button for 3 seconds to enter the menu.
•
Scroll to LCD page LCD cycle time (SEC xx).
•
Hold the right button for 5 seconds to enter program mode.
•
The value starts blinking: select the new value 1-30 seconds.
•
Confirm the new scrolling time by holding both buttons for 3 seconds.
•
The LCD will show OK when the setting is confirmed.
5.6.3 Add/remove registers to/from automatic scroll
•
Scroll to the register* that you would like to add or remove.
•
Hold the right button for 5 seconds to add or remove.
•
The LCD will show OK in or OK out.
*Only the registers in the sub-menu after: Total active energy, Total reactive energy, Active power and Program mode 1 can be added or removed to/from
the automatic scroll. Total active energy cannot be removed.
NOARK Ex9EMS 1P 2M - 7
