background image

4

INTRODUCTION

The 

NL Sonic Tester 

is an accuracy checker that is used together with the 

NL Camera

. The device produces a 

sound signal that is perceived and evaluated by the camera. The perceived dB-level of the signal can be used 
to ensure the correct level of the NL Camera’s readings and the condition of the microphone array.  

User Safety

The NL Sonic Tester is capable of delivering sound pressure levels that may cause permanent 
hearing damage. The user of the device should always use hearing protection when the device 
is operated at a distance less than 0.5 m to avoid permanent hearing damage. 

!! NOTE: Sound pressure level may exceed 80 dB (A) at a distance less than 0.5 m.

•  Follow all instructions. Please note that by using the device you agree to the terms of use. Misuse might  
    cause hearing damage, device damage or false readings.

•  Do not try to repair the device or open the enclosure of the NL Sonic Tester. Do not use a damaged device  
    or damaged power cords.

•  Use only the power supply provided by the NL Camera with the NL Sonic Tester.

•  Protect the device and accessories from dirt, dust, impacts, and liquids.

•  Do not leave the device plugged in.

Summary of Contents for NL SONIC TESTER SC10













Reviews: