- 39 -
Gyropilot Graphic user guide
– 33-60-025-003 rev3
In case of problem during autocompensation, the
Gyropilot Graphic
displays the following
error messages:
-
Cancellation at user request.
-
Detection of a gyration in the opposite direction. Start again clockwise.
-
Excessive variation between 2 heading measurements. Reduce the speed of your boat to 2
or 3 knots.
-
Angle correction higher than 20°. Start the autocompensation procedure over.
In case of autocompensation error, the measurements are not saved to the memory and the
sensor resumes its normal operating mode.
3.4 Setting the depth-finder blanking
In order to remove any keel echo, which makes the depth-finder freeze on a fixed value, it is
possible to set a blanking minimum, which allows the depth-finder to ignore the echoes
reflected between the transducer and the screening value.
3.4.1 Procedure for setting the depth-finder blanking
-
Using the
Page
key, select the
Main menu
page,
-
Then using the browser
1
1
, select
Configuration
then
offset
,
-
Press
Ent,
-
In the list of channels, select
depth
, then press
Ent,
-
Select
Occultation
then press
Ent
, the following page is displayed:
-
Using the browser
1
1
, move the cursor to the selected blanking value,
depth
Cancel :PAGE Confirm: ENT
1.0 4.9
2.4m
occultation
heading : 154°
speed : 0.00
Calibration
depth
sea temperature
bus voltage
magnetic headingg
validate : ENT Menu: PAGE
magnetic heading
Autocompenstionn
Offset
To return to the menu
press page
run one circle
