- 32 -
Gyropilot Graphic user guide
– 33-60-025-003 rev3
2.10 Choice of languages
You can configure the
Gyropilot Graphic
in one of these six available languages: French,
English, Italian and Spanish.
Using the
Page
key,
select the
Main menu
page,
then using the browser
1
1
, select
Configuration
then
languages
press the
Ent
key,
make your selection from the list of available languages,
press the
Ent
key to validate your selection or exit by pressing the
Page
key.
2.11 Use of the Race Timer
The
Gyropilot Graphic
includes a regatta chronometer. Times by default are T1= 6min and T2
= 4min.
2.11.1 Preparing and starting the race timer
Using the
Page
key,
select the
TOPLINE
display page,
press the
Ent
key : the selected screen switches to a black background,
using the ◄ and ► keys, select the
race timer
channel,
press the
Ent
key to validate your selection,
the chronometer is ready to be started,
at the start signal, press the
Ent
key to start the chronometer.
During countdown, the last 5 seconds are signalled by a BEEP, then the START signal is given
by the alarm.
Note that if you did not start the chronometer exactly at the start signal, you can synchronise the
countdown at T2 by pressing the
Ent
key. During the procedure, you can also return to the
initialisation value by pressing the
Ent
key for 2 seconds. The displays T1 = 6.00 minutes, for a
new start.
2.11.2 Setting of T1 and T2
Using the
Page
key,
select the
Main menu
page,
then using the browser, select
Configuration
then
calibration
,
press the
Ent
key,
in the list of channels, select
race timer
, press the
Ent
key,
using the browser, set the cursor
of
T1
, then the cursor of
T2
,
validate your setting by pressing the
Ent
key or exit by pressing the
Page
key.
