21
Press
【
Prev
】
back to previous menu.
Attention
：
Press
【
2
】
enter the “Show the preset” menu as Figure 4.2.1-5
Figure 4.2.1-5
Input the Preset NO and press the
【
ENTER
】
to call it, and the TFT will
display“Success" . Use the navigate
Key or
【
PREV
】
back to previous menu.
Press
【
3
】
enter the “Clear the Preset” to clear preset information as Figure 4.2.1-6 .
Figure 4.2.1-6
Input the PRESET NO which you want to clear, and press the Enter to clear it, and it will
show “Success" and back to previous men
。
4.2.2 Scan
Enter the menu as Figure
（
4.1.1-1
）
Press
【
2
】
enter the dome setting menu as the Figure
（
4.2.1-1)
；
Press
【
2
】
again to enter the dome scan setting as Figure 4.2.2-1
Figure 4.2.2-1
Dome scan setting include the: Left limit, Right Limit and Run scan
Press
【
1
】
to set the Left limit as Figure 4.2.2-2.
Figure 4.2.2-2
While enter the dome preset menu, the keyboard navigate keyboard can directly
control the dome; And the lens control zone (Iris, Focus, zoom) also work available;
And in other menu situation, normally the operation is NULL.
Preset num:
(1-128)
Press PREV to back
Preset num:
(1-128)
Press PREV to back
1. Set left limit
2. Set right limit
3. Run scan
Press ENTER sure
Press PREV to back