17
key to finish the setting.
● Startup pattern
：
【
N
】
+
【
PATTERN
】
to input the pattern ID
，
Press
【
PATTERN
】
to start
pattern
Remark: Pls set the running speed and stop time in each PRESET before you run this
function( through menu).
3.8.4
Tour
Starting TOUR function
：
【
N
】
+
【
TOUR
】
; Input the
【
TOUR
】
ID
，
then press the
【
TOUR
】
key
，
starting the tour. If just has one TOUR ID, you can direct press the
【
TOUR
】
key to start it. Remark: TOUR path must set in the menu. Before running, pls set the
speed between each PRESET.
3.9
Call the Dome main menu
【
9
】
+
【
5
】
+
【
PRESET
】
：
Input 95
，
press
【
PRESET
】
key
，
the main menu of aim
PTZ speed dome will display on the suitable monitor. About the PTZ speed dome’s
function set up, pls refer to the PTZ speed dome’s user manual.
3.10 Control the Matrix
3.10.1 Call the matrix main menu
【
SHIFT
】
+
【
SET
】：
Call the main menu, the menu will display on the object monitor.
About the matrix function set up, pls refer to the matrix’s user manual.
3.10.2
Confirm the setting
【
ENTER
】：
After finishing the matrix setting, press
【
ENTER
】
to confirm and finish it.
Abo
ut the matrix function set up, pls refer to the matrix’s user manual.
3.10.3 Change monitor ID
【
N
】
+
【
MON
】
; Input the monitor ID, then press MON. The image and the menu of the PTZ
speed dome will display in the monitor which you just set.
4. Control the NKB
●Controller Setting
Turn on the power and press
【
MENU
】
, the system information will display as (Figure
4.1-1), and press again, the information will disappear. You can do all the operation in this
situation..
Press
【
MENU
】
and hold 2s, and call the contro
ller’s main menu as(Figure 4.1-1). All the
sub menu setting needs enter the main menu. After entering the main menu, press the
Figure key or use the joystick to select the menu.