PD Dante
version 2.02 rev a - 31/10/18
9
Welcome and Unpacking
Thank you for purchasing a PD Dante
Please take care when unpacking your product
In the box, you will find
•
the PD Dante
•
USB Plug top supply with adaptors for the
o
UK
o
Europe
o
USA
o
Australia
•
0.5m USB lead
•
Quick Start Guide
Check that all the parts are present and in good condition
Please contact your retailer immediately should anything be incorrect
Quick Start Guide
Once you have unpacked your PD Dante you can follow this quick guide to get you started
using it.
Firstly, you will need to down load and install a copy of Dante Controller onto your PC/Mac
You can download this from
https://www.audinate.com/products/software/dante-controller
Next plug your PD Dante into your network with an RJ45 patch lead
If you have plugged into a PoE enabled router/port you will see the splash screen on the PD
Dante appear after a couple of seconds
If you do not have a PoE port, then you will need to plug in the supplied Plug Top Supply
and connect it to the PD Dante with the supplied USB cable. Note the USB cable supplied is
relatively short at 500mm this is due to the current draw of the PD Dante, longer cables may
work but we do not guarantee they will
After the PD Dante has booted you will be presented with the main screen
If you have a valid network connection the status light in the top left side of the screen next to
the P (primary) will turn green
At this point start Dante Controller on your PC/Mac and you will see your PD Dante appear
in the list of devices
You will then be able to select sources and destinations for your PD Dante
For more advice on using Dante Controller please visit the Audinate Website
Once you have done this you will be able to start using your PD Dante via the touch screen
interface
Please take the time to register your PD Dante here
http://www.nixerproaudio.com/Registration/registration.php
Once you have registered you will be full access to download the User Manual and any
software updates available for your PD Dante