PD Dante
version 2.02 rev a - 31/10/18
42
b.
max input level +8.5dBu
15.
3.5mm Headphone socket and microphone input
a.
Headphone output for driving loads from 8ohm to 600ohm
b.
Microphone input with gain control (up to 40dB) and level trim
c.
Socket wiring is suitable for use with most common mobile phone headsets
16.
Dual 1GHz RJ45 Dante inputs
a.
1GHz or 100MHz operation
b.
User configurable for Switched or Redundant operation
c.
Network configuration information available via menu
17.
Power input via
a.
PoE (13W) on Primary RJ45 connector
b.
USB input (1.5A) auto negotiates with connected USB port
i.
Direct from Mac/PC USB connector capable of delivering 1.5A
ii.
USB mains adaptor
iii.
USB battery pack
c.
Both power inputs can be active at the same time for redundancy
18.
USB port is also used for product firmware updates
19.
Wired remote-control option on 15way D-type connector
a.
RS485 balanced TX and RX pairs
b.
5V feed to connected device (up to 300mA)
20.
Internal oscillator with selectable routing to Dante output(s) and level control
a.
Sine Wave, Square Wave, Triangle Wave generation settable in steps to
frequency of 50Hz, 100Hz, 200Hz, 500Hz, 1kHz, 2kHz, 5kHz, 10kHz please
note at higher frequencies the square and triangle waves will appear more
and more like a sinewave
b.
White Noise Generator
c.
Pink Noise Generator
21.
LCD
a.
5.0” (127mm) diagonal 24bit colour LCD with 800xRGBx480 resolution
b.
LED backlight (adjustable brightness via software)
c.
5-point touch capacitive touch overlay with gesture support
22.
Size
a.
173mm long by 106mm wide by 34mm height
b.
0.5kG
23.
Optional mounting brackets
24.
Optional Case
25.
Optional breakout connector for 15way D-type connector