Technical Instruction
Ex-Separator Module iXT0
Safety instructions
page 10
Ex-Separator Module iXT0 - rev. 02 / 28.08.2017
WARNING
Check hazards due to explosive gases
Prior to beginning mounting works observe to follow any regula-
tions on safety at work and check possible risks due to explosive
atmospheres.
While working in channel systems observe to avoid electrostatic
charge:
−
Avoid unnecessary movement to reduce the risk of building
up electrostatic charge.
−
Discharge possible electrostatic charge from your body be-
fore you begin to install the sensor.
Disregarding may lead to personal injury or damage your facili-
ties.
4.2
Personnel requirements
Installation, commissioning and maintenance shall be executed only by personnel
meeting the demands as follows:
−
Expert personnel with relevant training an appropriate qualification
−
Personnel authorised by the plant operator
Qualified personnel
within the context of this documentation or the safety notes on
the product itself are persons who are sufficiently familiar with
installation, mounting, starting up and operation of the product
and who have the relevant qualifications for their work; for exam-
ple:
I.
Training, instruction or authorisation to activate/deacti-
vate, isolate, ground and mark electric circuits and de-
vices/systems according to the safety engineering
standards.
II.
Education and instruction according to the standards of
safety engineering regarding the maintenance and use
of adequate safety equipment.
III.
First aid training
