background image

55

... 8. Further instructions

Transport and storage

The steam must be evacuated from
the machine if it is to be transported
or stored in cold rooms.

➔ 

Remove water reservoir.

➔ 

Turn steam / hot water valve con-

trol knob to the right (fig. 1/Q and 7).

➔ 

When no more steam comes out,

turn steam / hot water valve control
knob to the left (fig. 1/Q and 7).

➔ 

Turn off the machine.

Please keep the original packaging
and protective material for storage
and transport purposes.

Replacement parts / accessories

You can purchase new water filters,
cleaning tablets and descaling agents
from any well-stocked specialist re tai-
ler.

Customer service

NIVONA products are designed to
meet the highest quality standards.
However, if questions do arise while
you operate your machine, we would
like to hear from you. Your support is
essential to our mission to further
develop and improve our products so
that they fully meet your needs. 

Guarantee and customer service 
conditions

Please consult the detailed guarantee
and customer service conditions in
the appropriate information booklet.

Protecting the environment

Electric and electronic appliances
often contain valuable or harmful
materials which should not be proces-
sed in the same way as normal house-
hold waste. If incorrectly processed,

they can harm human
health and the environ-
ment. Please therefore do
not put your machine in
the dustbin with normal
waste. Instead submit it to

the “collection point for the disposal
and recycling of electric and electro-
nic appliances” provided by your local
council. You can obtain further infor-
mation from your local council, the
waste collection services or the speci-
alist retailer who sold you the pro-
duct.

Summary of Contents for CafeRomatica NICR7




























Reviews: