Nivona CafeRomatica NICR 690, User Manual

Page: 10 / 30

10 Operation of the machine
Test strips Degree of
hardness
Water hardness
display
≤
1 red point 1 - 7°
WATER HARDNESS 1
2 red points 8 - 14° WATER HARDNESS 2
3 red points 15 -21° WATER HARDNESS 3
(factory settings)
≥
4 red points > 21° WATER HARDNESS 4
FILL WATER
TANK
easyclean
knob
OPEN
EASYCLEAN
KNOB
Operation without filter (factory settings)
Set the menu to
FILTER “NO” and
confirm with the rotary dial
When using the machine without a filter,
the water hardness must be entered in
the next step.
Operation with filter
Set the menu setting to
FILTER "YES"
and confirm with the rotary dial .
Using the mounting aid at the end
of the measuring spoon, screw the
filter into the water tank and confirm
using the
rotary dial .
Set water hardness*
Immerse supplied test strip briefly in water, shake it off and read the test result after
about 1 minute
In the menu, use the rotary dial to select the water hardness read from the test strip
and confirm
Open easyclean knob
Turn the easyclean knob to the vertical position (if it is not already there) and confirm
with the
rotary dial
Fill water tank (> 0.5 l)
Remove the water tank, fill water tank with fresh, cold water without carbonation
(no mineral water) and reinsert the tank
Do not fill with any carbonated liquids or any other liquids, or the warranty is void!
* for operation without filter
Screw filter
into water tank
NOTE
If used with a filter, the machine does not
need to be descaled as often.