Nivona CafeRomatica NICR 690, User Manual

Page: 26 / 30

26 Solving problems yourself
NOTE
To avoid problems, the following should
be observed:
Always remove the water tank
from the machine to fill it
Do not store coffee beans
in the refrigerator
Always empty containers
with the machine switched on
Use fresh and cooled milk
Problem Cause Remedy
No hot water or
drawing of milk froth /
steam possible easyclean knob
not opened Open easyclean knob
(Chapter 4.2.)
System might need
descaling Perform high-dosage
descaling (Chapter 8.5.)
Frother is plugged Disassemble frother completely
and clean it thoroughly
Only hot milk
instead of milk froth Residual water in
air intake nozzle Remove residual water from the
air intake nozzle by carefully
rubbing the rubber lip several
times in both directions
Too little milk froth
or liquid froth Frother is plugged Disassemble frother completely
and clean it thoroughly
Unsuitable milk Use cold milk
System might need
descaling Perform high-dosage
descaling (Chapter 8.5.)
Coffee comes out
only dropwise System might need
descaling Perform high-dosage
descaling (Chapter 8.5.)
Grind fineness is
too fine / too coarse Set grind fineness coarser / finer
(Chapter 7.2.)
Ground coffee is too fine Use coarser ground coffee
Too much ground coffee
added Add less ground coffee
Frother with air intake
nozzle removed
Air intake nozzle’s
rubber lip