20
5. Maintenance and Care
5.1 Inserting filter
Note:
See chapter 4.1 ‘Inserting
filter’
5.2 Changing filter
Filters lose their efficiency after
processing about 50 l of water.
“FILTER CHANGE” appears in the
display alternately with the normal
operating message, and the service
button (fig. 1/I) flashes.
Tip:
Only press the service button
(fig. 1/I) when you wish to change
filter. You can continue to make
coffee, hot water or steam. How -
ever, we recommend that you re -
place the filter immediately.
➔
Confirm your selection by press -
ing ‘ok’. The display reads
“PROGRAM LANGUAGE”.
➔
You can now either continue in
programming mode to change
other function settings or press
‘exit’ to leave programming mode.
4.6 Statistics
This program allows you to read
how often the following functions
have been used since the machine
started operating:
“1 CUP” / “2 CUPS” / “POWDER”
/ “TOTAL” (number of coffees
served) “WATER” / “STEAM” /
“CLEANING” / “DESCAL.” /
“F CHNG.”.
➔
Press the program key ‘P’ to
enter programming mode.
➔
Press the > key until “PROGRAM
STATIST.” appears.
➔
Press the ‘ok’ key.
➔
Press the > key until the desired
statistic appears.
➔
You can return to “PROGRAM
STATIST.” at any stage by pressing
ok.
➔
You can now either continue in
programming mode to change
other function settings or press
‘exit’ to leave programming mode.
... 4. Programming functions
Downloaded from CoffeeMachineManual.com Manuals
