Niviuk ICEPEAK EVOX 20, User Manual

Page: 6 / 26

6
For the construction process of the ICEPEAK EVOX we use the same
criteria, quality controls and manufacturing processes as in the rest of
our range. From Olivier Nef’s computer to fabric cutting, the operation
does not allow for even a millimetre of error. The cutting of each wing
component is performed by a rigorous, extremely meticulous, automated
computer laser-cutting robotic arm.
This program also paints the guideline markers and numbers on each
individual fabric piece, thus avoiding errors during this delicate process.
The jigsaw puzzle assembly is made easier using this method and
optimises the operation while making the quality control more efficient.
All Niviuk gliders go through an extremely thorough and detailed final
inspection. The canopy is cut and assembled under strict quality control
conditions facilitated by the automation of this process.
Every wing is individually checked with a final visual inspection.
The fabric used to manufacture the glider is light, resistant and durable.
The fabric will not experience fading and is covered by our warranty.
All lines are made from Technora
The line diameter has been calculated depending on the workload and
aims to achieve the required best performance with the least drag.
The lines are semi-automatically cut to length and all the sewing is
completed under the supervision of our specialists.
Every line is checked and measured once the final assembly is concluded.
Each glider is packed following specific maintenance instructions as
recommended by the fabric manufacturer.
Niviuk gliders are made of premium materials that meet the requirements
of performance, durability and certification that the current market
demands.
Information about the various materials used to manufacture the wing can
be viewed in the final pages of this manual.
1.5 ELEMENTS, COMPONENTS
The ICEPEAK EVOX is delivered with a series of accessories that will
greatly assist you in the maintenance of your paraglider:
- A Kargo bag. This bag is large enough to hold all equipment
comfortably and with plenty of space.
- An inner bag to protect the wing during storage and transport.
- An adjustable compression strap to compress the inner bag and
reduce its volume.
- A bag to protect the risers.
- A repair kit with self-adhesive Ripstop tape in the same colour as the
wing and spare O-rings to protect the maillons.
- An NKare Bag that makes optimal packing of the ICEPEAK EVOX easy.
2. UNPACKING AND ASSEMBLY
2.1 CHOOSE THE RIGHT LOCATION
We recommend unpacking and assembling the wing on a training hill or a
flat clear area without too much wind and free of obstacles. It will help you
to carry out all the recommended steps required to check and inflate the
ICEPEAK EVOX.
We recommend the whole installation procedure is supervised by a
qualified professional instructor or official dealer. Only they can address
any doubts in a safe and professional way.
2.2 PROCEDURE
Take the paraglider out of the rucksack, open and unfold it on the ground
with the lines positioned on the undersurface, oriented in the direction of
inflation. Check the condition of the fabric and the lines for defects. Check
the maillons/IKS connecting the lines to the risers to make sure they are