38
NIVEO PROFESSIONAL NW-ER3 User’s Manual
Here are descriptions of every setup item:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you’ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G),
only wireless clients using the wireless band you
select (802.11b, 802.11n, or 802.11g) will be able
to connect to this access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this access point.
If you want to allow 802.11b, 802.11g, and
802.11n clients to connect to this access point,
select 2.4GHz (B+G+N).
MAIN SSID
Please input the ESSID (the name used to identify
this wireless access point) here. You can input up
to 32 alphanumerical characters.
PLEASE NOTE
THAT ESSID IS CASE SENSITIVE.
Multiple ESSID
The access point supports multiple SSID function;
up to four SSIDs can be set. If you want to
configure additional SSIDs, please click this button.
For detailed descriptions of the function, please
refer to Section 2-4-1-1.
Channel Number
Please select a channel number you wish to use.
The channel number must be same with another
wireless access point you wish to connect
Associated Clients
Click ‘Show Active Clients’ button and a new popup
window will appear which contains the
information about all wireless clients connected to
this access point. You can click ‘Refresh’ button in
popup window to keep information up-to-date
Root AP SSID
In ‘Universal Repeater’ mode, this device can act
as a station to connect to a Root AP. You should
