35
NIVEO PROFESSIONAL NW-ER3 User’s Manual
2-4-5 AP Bridge-WDS Mode
In this mode, this wireless access point will connect to up to four wireless
access points which uses the same mode, and all wired Ethernet clients
of every wireless access points will be connected together. You can use
this mode to connect a network to other networks which is physically
isolated.
When you use this mode, this access point is still able to accept wireless
clients.
When you select ‘AP Bridge-WDS’, the following options will be
displayed:
Here are descriptions of every setup item:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you’ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G),
only wireless clients using the wireless band you
select (802.11b, 802.11n, or 802.11g) will be able
to connect to this access point.
