Chapter
3: Web Management
System - IPv6
NGSME24G4S User Manual | 32
3.1.1.3. System - IPv6
This page allows you to view and set configurations regarding to the switch’s IPv6 setting.
The left part (Configured) is for changing settings and the right part (Current) displays the
current setting.
Auto Configuration
Enable IPv6 auto-configuration by checking this box. If system cannot obtain the stateless
address in time, the configured IPv6 settings will be used. The router may delay responding
to a router solicitation for a few seconds, the total time needed to complete auto-configuration
can be significantly longer.
Address
Provide the IPv6 address of this switch. IPv6 address is in 128-bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can appear only once. It
can also represent a legally valid IPv4 address. For example, '::192.1.2.34'.
Prefix
Provide the IPv6 Prefix of this switch. The allowed range is 1 to 128.
Router
Provide the IPv6 gateway address of this switch. IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separating each field
(:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be
used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can appear only once. It can also represent a legally valid IPv4 address. . For example,
'::192.1.2.34'.
Buttons
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Renew:
Click to renew IPv6 AUTOCONF. This button is only available if IPv6
AUTOCONF is enabled.
