Chapter
3: Web Management
MVR - MVR Channel Groups
NGSME24G4S User Manual | 255
3.2.7.2. MVR - MVR Channel Groups
Entries in the MVR Channels (Groups) Information Table are shown on this page. The MVR
Channels (Groups) Information Table is sorted first by VLAN ID, and then by group.
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first
20 entries from the beginning of the MVR Channels (Groups) Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting
point in the MVR Channels (Groups) Information Table. Clicking the Refresh button will
update the displayed table starting from that or the closest next MVR Channels (Groups)
Information Table match. In addition, the two input fields will - upon a Refresh button click -
assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The
“>>” will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
“|<<” button to start over.
MVR Channels (Groups) Information Table Columns
VLAN ID
VLAN ID of the group.
Groups
Group ID of the group displayed.
Port Members
Ports under this group.
Buttons
Auto-refresh:
Automatic refresh occurs every 3 seconds.
Refresh:
Refreshes the displayed table starting from the input fields.
|<<:
Updates the table starting from the first entry in the MVR Channels (Groups)
Information Table.
>>:
Updates the table, starting with the entry after the last entry currently displayed.
