Chapter 3: Featuring Configuration
– Web UI
Featuring Configuration
– Web UI
NGSM48T2 User Manual | 88
Select the switch to which this ACE applies. This parameter is reserved to the
Stacking model. If the switch doesn't support stacking, the parameter will not display
here.
Any:
The ACE applies to any port.
Switch n:
The ACE applies to this switch number, where n is the number of the
switch.
Frame Type
Select the frame type for this ACE. These frame types are mutually exclusive.
Any:
Any frame can match this ACE.
Ethernet Type:
Only Ethernet Type frames can match this ACE. The IEEE 802.3
describes the value of Length/Type Field specifications to be greater than or equal to
1536 decimal (equal to 0600 hexadecimal).
ARP:
Only ARP frames can match this ACE. Notice the ARP frames won't match the
ACE with ethernet type.
IPv4:
Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match the
ACE with ethernet type.
IPv6:
Only IPv6 frames can match this ACE. Notice the IPv6 frames won't match the
ACE with ehternet type.
Action
Specify the action to take with a frame that hits this ACE.
Permit:
The frame that hits this ACE is granted permission for the ACE operation.
Deny:
The frame that hits this ACE is dropped.
Rate Limiter
Specify the rate limiter in number of base units. The allowed range is 1 to 16.
Disabled indicates that the rate limiter operation is disabled.
SelectSelectPort Copy
Frames that hit the ACE are copied to the port number specified here. The allowed
range is the same as the switch port number range. Disabled indicates that the port
copy operation is disabled.
