jbdp612a0600p_02
♦
11 / 12
Menu 20 – Storage of current configurations
Via the menu “Stor” you can store maximally 5 different configurations in the programming device. To file the data on the desired storage
space you have to push both buttons simultaneously to select the required storage space. After activating the storage mode in the display
appears “St n” - n stands for the required storage space. To store the configuration, you have to press the buttons simultaneously, again.
Menu 21 – Showing the current pressure value
When the menu “Act” is active it is possible to display the current pressure value. The current value is displayed for two seconds after both
buttons were pressed simultaneously. It is possible to repeat this process after “Act” is on the display again.
Menu 22 – Showing the low limit of the measuring range
When the menu “Lo r” is active it is possible to display the low limit of the measuring range of the pressure switch. The low limit is displayed
for two seconds after both buttons were pressed simultaneously. It is possible to repeat this process after “Lo r” is on the display again.
Menu 23 – Showing the high limit of the measuring range
When the menu “Hi r” is active it is possible to display the high limit of the measuring range of the pressure switch. The high limit is displayed
for two seconds after both buttons were pressed simultaneously. It is possible to repeat this process after “Hi r” is on the display again.
Menu 24 – Showing the unit
When the menu “unit” is active it is possible to display the unit of the pressure value with which the pressure switch works.
The unit is displayed for two seconds after both buttons were pressed simultaneously. It is possible to repeat this process after “unit” is
on the display again.