Charger:
Lithium battery can be charged when not use. Put it onto the charge box that comes
with the kit and connect it with power adaptor to charge the battery.
Time to full charge the battery:3-4hours.
Battery capacity: 2600mAh.
LED indicator at charge box:
Red: In Charging. Green: Full Charged.
Winking with red: Wrong connecting.
Lock Emitting:
Turn on the device, use H and V buttons to select the laser plane you want to work
with, then press and hold the OUT DOOR button for about 5 seconds until the
leveling diode starts flashing quickly - the compensator is blocked, you can work with
the inclined plane. To return to work with the compensator, press the OUT DOOR
button again for approx. 5 seconds until the leveling diode starts flashing slowly - the
compensator is unlocked.
Note:
when the compensator is locked, it is not possible to turn the laser planes on /
off (H and V buttons are inactive), the planes are switched on with the compensator
switched on.
Alarm Functions
Out Level Alarm:
When the pendulum is unlocked and the Cross Line Laser is within 4
° of level, the
unit will be in automatic leveling range, in this situation LED light will light constantly.
When the base of the unit locates outside the 4
°leveling range the laser beam will
flash.
Low Battery Alarm:
The LED indicator will decrease (the battery charging diodes will be systematically
going out), when only one diode is lit - the battery should be charged.
