HOW TO OPERATE THE UNIT
CL lasers are precise measuring instruments, which require care and attention during
work (every blow, fall - it can affect correct operation). If you notice incorrect
measurements, please contact with the Nivel System service.
Lasers generate a highly focused light beam - avoid direct eye contact.
ATTENTION: the laser beam generated by the laser diode has an oval cross-
section, passing through a 360
° prism, lines slightly differing in brightness
(vertical, horizontal lines) are generated, this is normal operation, this does not
indicate a defect in the equipment.
MENU Keypad:
ON / OFF
- turn on / off the device
- after switching on the equipment automati
cally levels itself within ± 4°.
- when aligning (leveling), the leveling diode blinks slowly, after leveling, the diode
lights up constantly.
- the battery indicator with LEDs indicates the battery's charge level.
OUT DOOR
- enabling / disabling the Pulse function, when working with a laser
sensor, enable the function. When the function is turned on, the laser beam slightly
loses light (this is correct behavior). With the function activated - the function indicator
is on.
H
- on / off horizontal surfaces
V
- on / off vertical planes
OUT DOOR - on / off pulse function (cooperation with the sensor)
When the Pulse function is switched on, the siren lights up in green - in this mode the
laser beam is picked up by the laser sensor. Pressing the OUT DOOR button again
will disable the pulse function (the siren will go off)
Battery:
This device can be used with lithium batteries.
