[Confidential document_Removal from your office is prohibited_Copying prohibited]
SHIRAKAWA NITTO KOHKI Co., Ltd
Document No.: QT-D002
Page
:
5
Issued
:
Jan-2005
Revised
:
Sep-2006
3) Assembly of mechanical parts
1
)
Edges of Bit Holder to
be inserted into Cam
Guide, has 2 squared
holes.
2
)
Tighten Nose Nut Assy
with pushing Bit Holder.
3
)
Apply adhesive.
4
)
Tighten with Torque
spanner.
(
290kgf
)
(
4
)
Foaming wires
Wires must not be jammed with
Pilot Rod D.
Noise Killer must not be touched
with Frame.
Attach Insulating Plate.
Direction to tighten
Direction to tighten
Pay attention to
jamming with wires.