5
Fig. 2
CAUTION
Always keep the inside of the Dust Connection
Hose Clean. Accumulated dust inside of the
Hose will decrease not only the efficiency of
dust connection but also the performance of the
tool itself.
4-3. Thread Size of Hose Fitting
The product comes with a metal fitting with
Rc(metric) thread. Connect the Bushing R thread x
NPT thread included as standard accessories, if you
would like to have American NPT thread instead.
5. ATTACH ABRASIVE PAPER
WARNING
Always turn off the air supply and disconnect the
air supply hose beforehand whenever replacing
Abrasive Papers.
Put the Abrasive Paper on the Pad so that the paper
holes and pad holes will properly align. Misalignment
of those holes will decrease the performance of dust
collection.
Abrasive Paper
Fig. 3
6. HOW TO OPERATE THE TOOL
6-1. Start and Stop
To Start: Hold the tool and press the Throttle Lever.
To stop: Leave the hand off the Throttle Lever.
Fig. 4
6-2. Speed Adjustment
WARNING
Be sure to keep hands clear of moving parts.
The Speed can be adjusted with a Regulator.
Select a desired Speed by adjusting the Regulator.
Maximum Speed: Turn the Regulator dial clockwise
Minimum Speed: Turn the Regulator dial
counterclockwise
Fig. 5
6-3. How to Operate
After the tool is turned on, slightly press the material
to be ground during operation.
7. REPLACING THE PAD
WARNING
Always turn off the air supply and disconnect the
air supply hose beforehand whenever replacing
the Pad.
Tighten the Pad securely. Insufficient tightening
of screws may lead to unintended accidents.
