7
EN
Accessory Hazards
WARNING
Disconnect the tool from the energy supply before fitting or changing the inserted tool or accessory.
Avoid direct contact with the inserted tool during and after use, as it can be hot or sharp.
Use only accessories and consumables that are the sizes and types recommended by the manufacturer of this
tool; do not use accessories or consumables of other types or sizes.
Grinding wheels and cutting-off tools shall not be used.
Check that the maximum operating speed of the inserted tool (flap wheels, abrasive belts, fiber discs, backing
pads, etc.), is higher than the rated speed of the sander or polisher.
Self-fixing sander discs shall be placed concentrically on the supporting pad.
Workplace Hazards
WARNING
Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by the use of
the tool and also of trip hazards caused by the air line or hydraulic hose.
This tool is not intended for use in potentially explosive atmospheres and is not insulated against contact with
electric power.
Ensure that there are no electrical cables, gas pipes, etc., which can cause a hazard if damaged by the use of
the tool.
Dust and Fume Hazards
WARNING
Dust and fumes generated when using this tool can cause ill health (for example cancer, birth defects, asthma
and/or dermatitis); risk assessment and implementation of appropriate controls for these hazards are essential.
Risk assessment should include risks such as the dust created by the use of the tool and the potential for
disturbing existing dust.
Operate and maintain this tool as recommended in these instructions to minimize dust or fume emissions.
Direct the exhaust so as to minimize disturbance of dust in a dust-filled environment.
Where dust or fumes are created, the priority shall be to control them at the point of emission.
All integral features or accessories for the collection, extraction or suppression of airborne dust or fumes
should be correctly used and maintained in accordance with the manufacturer's instructions.
Select, maintain and replace the consumable or inserted tool as recommended in the instruction handbook to
prevent an unnecessary increase in dust or fumes.
Use respiratory protection in accordance with the employer's instructions and as required by occupational
health and safety regulations.
TQ15266-0̲MYS-20̲en.indb 7
2017/07/06 9:32:14
