manualshive.com logo in svg

Nitto Kohki myton MYS-20, Instruction Manual

Share
Download
Nitto Kohki myton MYS-20 Instruction Manual Download Page 19

17

EN

4 

Perform a trial run and wipe off extra grease that seeps out

Attach a connecting hose to the coupler of the tool and operate the tool.

At that time, grease may scatter around the Spindle (

7

), so use with care.

Stop the tool in a few seconds and always detach the tool from the connecting hose, then wipe off any grease 

that seeps from the periphery of the Spindle.

Disposal

Separate the tool, accessories, and packing materials for environmentally-friendly recycling.

When disposing of the tool, follow the rules of each municipality.

8 Optional Parts

A variety of PAD and Abrasive Discs are available for the MYS-20 so that you can use them according to the

application.

To purchase these items, contact the retailer where you purchased the tool.

Part no.

Product name

Quantity

TQ14382

PAD 2"

1 pcs.

TQ14383

PAD 1-1/2"

1 pcs.

TQ14384

PAD 1"

1 pcs.

TB09736

Abrasive Disc 1" × #40 Ass'y

25 pcs.

TB09737

Abrasive Disc 1" × #60 Ass'y

25 pcs.

TB09738

Abrasive Disc 1" × #80 Ass'y

25 pcs.

TB09739

Abrasive Disc 1" × #100 Ass'y

25 pcs.

TB09740

Abrasive Disc 1" × #120 Ass'y

25 pcs.

TB09741

Abrasive Disc 1" × #180 Ass'y

25 pcs.

TB09742

Abrasive Disc 1" × #240 Ass'y

25 pcs.

TB09743

Abrasive Disc 1" × #320 Ass'y

25 pcs.

TB09744

Abrasive Disc 1-1/2" × #40 Ass'y

25 pcs.

TB09745

Abrasive Disc 1-1/2" × #60 Ass'y

25 pcs.

TB09746

Abrasive Disc 1-1/2" × #80 Ass'y

25 pcs.

Part no.

Product name

Quantity

TB09747

Abrasive Disc 1-1/2"×#100 Ass'y

25 pcs.

TB09748

Abrasive Disc 1-1/2" × #120 Ass'y

25 pcs.

TB09749

Abrasive Disc 1-1/2" × #180 Ass'y

25 pcs.

TB09750

Abrasive Disc 1-1/2" × #240 Ass'y

25 pcs.

TB09751

Abrasive Disc 1-1/2" × #320 Ass'y

25 pcs.

TB09752

Abrasive Disc 2" × #40 Ass'y

25 pcs.

TB09753

Abrasive Disc 2" × #60 Ass'y

25 pcs.

TB09754

Abrasive Disc 2" × #80 Ass'y

25 pcs.

TB09755

Abrasive Disc 2" × #100 Ass'y

25 pcs.

TB09756

Abrasive Disc 2" × #120 Ass'y

25 pcs.

TB09757

Abrasive Disc 2" × #180 Ass'y

25 pcs.

TB09758

Abrasive Disc 2" × #240 Ass'y

25 pcs.

TB09759

Abrasive Disc 2" × #320 Ass'y

25 pcs.

TQ15266-0̲MYS-20̲en.indb   17

2017/07/06   9:32:15

Summary of Contents for myton MYS-20

























Reviews:

No comments

Brands by name

Popular brands

Load more brands