16
EN
Maintenance and Inspection
WARNING
For maintenance and inspection, be sure to detach the connecting hose from the tool.
Use genuine parts.
Never touch moving parts while the tool is running.
Replenishing grease
Apply grease (Sumitec 305) as needed to the inside of the main unit about once a month according to the following
procedure.
1
Loosen the + Countersunk Head Screw 4x16 (
1
)
of the Exhaust Cover and remove the Exhaust
Cover (
2
), Spacer (
3
), and Packing Cover (
4
)
234
1
2
Use a grease gun to inject grease into the Grease
Inlet (
5
)
• Use a grease gun nozzle with a tip outer diameter of
less than 3 mm.
• The nozzle for a grease nipple cannot be used for
injection.
• You do not need to remove the Exhaust Filter (
6
). If it
came off, attach as shown in the illustration.
5
6
3
Assembling the Exhaust Cover
Assemble the Exhaust Cover by performing the
disassembly procedure in reverse.
1
2
4
7
3
1
+ Countersunk Head Screw 4×16
2
Exhaust Cover
3
Spacer
4
Packing Cover
5
Grease Inlet
6
Exhaust Filter
7
Spindle
Maintenance and Inspection
TQ15266-0̲MYS-20̲en.indb 16
2017/07/06 9:32:15
