![Nitto Kohki MYTON MYG-50 Instruction Manual Download Page 5](http://html1.mh-extra.com/html/nitto-kohki/myton-myg-50/myton-myg-50_instruction-manual_1696635005.webp)
3
EN
Work area safety
WARNING
z
Do not use the tool at home.
This is a professional tool (industrial or work tool for business). Do not bring the tool home and use it there.
z
Keep the work area clean.
Working in a messy work area or work table could cause an accident.
z
Be cautious about the work area.
Do not expose the tool to rain.
Do not use the tool in a damp or wet place.
Keep the work area well lit.
z
Do not operate the tool in an explosive atmosphere, such as in the
presence of flammable liquids (thinner, lacquer, gasoline, etc.) or
gas.
z
Do not let children come close to the work area.
Keep children and bystanders away while operating tool.
z
Some tools generate loud noise.
Check that the noise regulations of each area are complied with.
z
When work has to be done in high locations, make sure there is
nobody underneath the work area.
,IWKHWRRORUPDWHULDOLVGURSSHGLWFRXOGFDXVHDQDFFLGHQWRU
injury.
z
Before starting operation, make sure that there is no conduit,
water pipe or gas pipe by your work area.
,IDWRROWRXFKHVDEXULHGREMHFWLWFRXOGFDXVHHOHFWULFDOVKRFNRUOHDNDJHZKLFKFRXOGFDXVHDQDFFLGHQW
Before starting to work
WARNING
z
Perform inspection before using the tool.
%HIRUHXVLQJWKHWRROFKHFNIRUORRVHVFUHZVRQWKHWRRODQGIRUGDPDJHRQWKHSURWHFWLYHFRYHURURWKHUSDUWV
and make sure that the tool operates normally and demonstrates prescribed functions.
&KHFNWKHSRVLWLRQDGMXVWPHQWDQGWLJKWHQLQJVWDWXVRIPRYLQJSDUWVSDUWVGDPDJHDWWDFKPHQWVWDWXVDQGDOO
other locations for issues that could affect operation.
)RUSDUWVUHSODFHPHQWDQGUHSDLUIROORZWKHLQVWUXFWLRQVLQGLFDWHGLQWKHLQVWUXFWLRQPDQXDO
,IWKHUHDUHQRLQVWUXFWLRQVLQWKHLQVWUXFWLRQPDQXDOFRQWDFWWKHUHWDLOHUZKHUH\RXSXUFKDVHGWKHWRRORUWKH
nearest NITTO service member store.
Do not use the power tool if the switch does not turn it ON and OFF.
z
Make sure to properly attach the tip tool.
,IWKHWLSWRROLVQRWDWWDFKHGSURSHUO\WKHUHLVDULVNRIMXPSLQJRXWRUGDPDJHZKLFKFRXOGUHVXOWLQLQMXU\
z
After adjustment, be sure to remove tools such as spanners, wrenches, etc.
z
Use appropriate tools.
Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes not intended.
z
Do not use tools in an unreasonable manner.
:KHQWKHVSHFLILFDWLRQVDUHIROORZHGWRROVFDQEHXVHGHIILFLHQWO\DQGVDIHO\
z
Secure workpieces.
Where possible use clamps or a vise to hold the work. It is safe to hold the workpieces by hand and both hands
can be used for operation.