10
EN
Product Specific Safety Rules
WARNING
z
Protect your body from chips.
'XULQJJULQGLQJKRWFKLSVVFDWWHU6LQFHLWFRXOGFDXVHEOLQGQHVVUHVSLUDWRU\GLVRUGHUVEXUQVRUKHDULQJ
LPSDLUPHQWZKHQZRUNLQJWRSURWHFW\RXUERG\XVHSURWHFWLYHH\HZHDUDGXVWPDVNHDUSOXJVJORYHV
H[FOXGLQJNQLWWHGJORYHVORQJVOHHYHGZRUNFORWKHVHWF,QDGGLWLRQGRQRWEULQJ\RXUIDFHFORVHWRWKHWRRO
z
Do not use a Grinding Wheel with an allowable rotational speed (indicated on the Grinding Wheel top label)
lower than the actual rotational speed of the machine. Also, please make sure that the specified dimensions of
the Grinding Wheel conform to the specifications of this machine.
z
When attaching the Grinding Wheel, check that there are no abnormalities such as cracking, chipping, or
excessive wear.
'RQRWXVHWKHWRROLIWKHUHLVDVOLJKWDEQRUPDOLW\VXFKDVD*ULQGLQJ:KHHOFRQWDLQLQJPRLVWXUHGDPDJHORVV
etc. of the display label.
z
Use our genuine Outer Flange.
'RQRWXVH2XWHU)ODQJHVWKDWDUHGDPDJHGEHQWRUVHYHUHO\ZRUQRXW
$OVRGRQRWXVHDVXEVWLWXWHIODQJHRUIODWZDVKHU
z
Check that the Grinding Wheel is suitable for the Outer Flange.
Tighten the Grinding Wheel moderately.
When aligning the Grinding Wheel to the Outer Flange do not use a reduced bushing unless the bushing to be
used is supplied from the parts maker or is as specified.
z
When attaching the Grinding Wheel, make sure that the label on the top of the Grinding Wheel comes into
contact with the mounting surface of the Spindle.
)RUWKHODEHORQWRSRIWKH*ULQGLQJ:KHHOXVHRQHZLWKWKHVDPHGLDPHWHUDVWKHRXWHUGLDPHWHURIWKHHQGIDFH
RIWKH6SLQGOHRUODUJHU
Precautions on Use
