Professional tool
Pneumatic Grinder
Model: MYG-50
z
The end tool in the drawing is not included with the tool.
[Specifications]
Model
MYG-50
Maximum operating pressure
MPa
0.6
Air consumption (No load)
m
3
/min
0.70
Rated speed (No load)
min
-1
11000
Depressed Center Grinding Wheel outer diameter
mm (inch)
125 (5")
Depressed Center Grinding Wheel hole diameter
mm (inch)
22.2 (7/8")
Mass (weight)
kg
2.5
Sound pressure level *1
dB (A)
92
Sound power level *1
dB (A)
103
Vibration level *2
m/s
2
4.5 (Main unit)
4.2 (Side Handle)
Thread size of Air Inlet
Rc 3/8
*1
Based on the ISO15744 measurement standard.
*2 Based on the 3 axes combined value measurement standard of the
ISO28927-1 of the hand-held tool frequency correction vibration
acceleration effective value.
z
Please read manual carefully before you attempt to use your tool so that you may use it
properly and safely.
z
Keep the manual handy - so you can use it whenever necessary.
'XHWRFRQWLQXRXVSURGXFWGHYHORSPHQWLPSURYHPHQWWKHVSHFLILFDWLRQVDQGFRQILJXUDWLRQVLQWKLV
document are subject to change without prior notice.
TQ15279-0 12/2017
INSTRUCTION
MANUAL
Manufactured by.
NITTO KOHKI CO., LTD.
1DNDLNHJDPLFKRPH2KWDNX7RN\R-DSDQ
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
(Original Instructions)
