5
the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
<Service>
●
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
●
Hold power tool by insulated gripping surface,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Drill safety warnings
- Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
POWER TOOL SAFETY
WARNING
●
Always make sure that the machine is properly
grounded. If the machine is not properly grounded,
someone can get an electric shock.
●
If you have any doubt about the grounding of
the magnetic drilling machine, contact a licensed
electrician.
●
Never connect the grounding conductor to a gas
pipe. This will result in an explosion and severe
injuries or death.
●
Always check the grounding conductor. If you have
any doubts about the grounding conductor contact a
licensed electrician.
●
Wiring connections to a grounding rod require the
expertise of a licensed electrician. Do not attempt
the wire connections yourself. Always contact a
licensed electrician.
●
Do not abuse the power cord. A damaged power
cord can cause an electrocution. A damaged power
cord can cause
fi
res. Always inspect the cord. If the
cord is damaged, do not use the magnetic drilling
machine.
●
Do not carry the machine by the cord. Do not pull
the cord to disconnect it from a socket.
●
The cord can become damaged from heat, contact
with sharp objects or from being twisted. Always
inspect the cord. Do not use the machine if the cord
is damaged.
●
Always use a ground fault circuit interrupter. The use
of a ground fault circuit interrupter may be required
by government regulations. The failure to use a
ground fault circuit interrupter may result in electric
shock.
●
Avoid starting the magnetic drilling machine abruptly
or unintentionally.
●
Always make sure that the switch is turned off before
connecting the power source.
●
Always disconnect the power source and turn off
the switch before setting up for work operations.
Always disconnect the power and turn off the
switch when inspecting work. Always disconnect
the power and turn off the switch before attempting
any maintenance. Failure to disconnect the power
and turn off the switch during set up, inspection
or maintenance can cause accidents and severe
injuries.
ABOUT YOUR NITTO PORTABLE
MAGNETIC DRILLING MACHINE
DANGER
Do not use your portable drilling machine on the
ceiling.
●
Use of the portable drilling machine on the ceiling
is dangerous. The machine could fall. The falling
machine could cause severe injuries or death.
WARNING
Do not use the Magnet for more than
fi
ve hours.
●
More than
fi
ve hours of uninterrupted operation may
cause a fire. Five hours of uninterrupted operation
generates extreme heat in the Magnet. This heat
can cause a fire. Do not touch the Magnet. When
the Magnet is hot, touching it will cause a severe
burn injury. Never use the Magnet for more than
fi
ve continuous hours. When you are not using the
Magnet, turn the switch to the OFF position and pull
the Plug out of the power source.
Do not use the Drill Motor for over 30 minutes.
●
Uninterrupted operation of the Drill Motor for over 30
minutes generates heat. This heat can cause a
fi
re.
Never use the Drill Motor for over 30 minutes. When
you are not using the Drill Motor, turn the switch to
the OFF position and pull the Plug from the power
source.
Use only on magnetic materials.
●
Your portable drilling machine cannot be used
on non-magnetic materials, such as aluminum,
Summary of Contents for LO-3550
Page 25: ......
