8
EN
Attaching the Pistol Grip
WARNING
When attaching or removing the Pistol Grip, always disconnect the power plug from the outlet.
After fixing the Pistol Grip with the screw, check for looseness, slip, and displacement of the screw.
CAUTION
Use care not to lose parts.
1
Match the rib of the Pistol Grip body A and the groove of the frame handle
Match the semicircle cut-out of the Pistol Grip body A and the semicircle rib of the frame handle.
2
Attach the parts to the positions shown in the following figure
3
Match the rib of the Pistol Grip body B and the groove of the frame handle
Match the semicircle cut-out of the Pistol Grip body B and the semicircle rib of the frame handle.
4
Tighten the screws
Lever start type
Push start type
1
Body A ...... 1 piece
2
Body B ..... 1 piece
3
Trigger ...... 1 piece
4
Pin ............ 1 piece (2 pieces for push start type)
5
Spring ....... 1 piece (lever start type only)
6
Screw ....... 5 pieces
1
Rib
2
Groove
3
Semicircle cut-out
4
Semicircle rib
Preparation
TV07844-0̲DLV30A-AD̲en-UL.indb 8
2017/06/22 10:25:59
