Nitto Kohki AMB-0307, Instruction Manual

Page: 10 / 14

9
8. CONDITION FOR USE
Burn-out chips suggest that either the feed speed is
too slow or the Indexable Insert has worn-out. Change
the cutting conditions or check the conditions of the
Indexable Insert.
9. THREAD SIZE OF HOSE FITTING
The product comes with a metal fitting with Rc (metric)
thread. Connect the Bushing R thread x NPT thread
included as standard accessories, if you would like to
have American NPT thread instead.
10. STORAGE
CAUTION
When tool is not used, store it out of reach of
children.
Avoid storing the tool in a location subject to high
humidity. If the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation, oil the tool at the air inlet
with machine oil ISO VG-10 and run it for a short time.
11. ORDERING SERVICE PARTS
●
For further operational and handling information or
for replacement of parts and components, contact
the company from whom you purchased the tool or
an authorized dealer.
●
In ordering parts and components give each part
number, part name and quantity required.
●
Use only NITTO genuine parts.
12. OPTIONAL PARTS
Part No. Description Qty
TB01159 Indexable Insert with Hole 12.7 10 pcs
TB01791 Indexable Insert 12.7 sq. R2 10 pcs
TB01651 Indexable Insert 12.7 sq. R3 10 pcs
TB01790 Indexable Insert 12.7 sq. R4 10 pcs
TQ01683 Spanner T-15D 1 pc.
TB02539 Attachment for Small Dia. Pipe ※ 1 set
※ For Steel Pipe Out. Dia. 80mm – 200mm