7
※ベース固定ねじ（なべ小ねじ
M4×10）は別途ご用意くだ
さい。
掛け部
ベース
通線孔
感知器固定ねじ
2
3
4
1※
1. Pay attention to the vertical direction of the Base and fix it to the
wall. (Detector Fixing Screw to be on the bottom).
2. Pull out Wiring cable from the Wiring Hole.
3. Do not tighten the Detector Fixing Screw until the Detector is
mounted onto the Base.
4. Put the Detector onto the Base and slide it downward, as shown
in the figure. Four hooks on the Base are to be slotted into the
slit provided on the back side of the Detector, in order to be
temporarily fixed.
Base Mounting Dimensions
（
mm
）
Installation
Wiring Hole
Base
Detector Fixing Screw
Wiring Hole
Base
Detector Fixing Screw
Hook
※
Screws for fixing the base
(Pan-head screw M4x10)
to be prepared separately.
