Nitsuko NVM-2, Release Notes

Page: 40 / 57

Editing Parameters
36 Issue 1-0
Editing System Options Parameters (cont’d)
¾
Lamp off string (cont’d)
X - The Voice Mail replaces the “X” with an extension
number. This way, the Voice Mail knows which
extension should have its lamp turned off. A “Lamp
Off” string must include an “X.”
G - Number of Messages in a Mailbox. (This number
appears on display phones that can show the number
of messages in the mailbox).
NOTES
:
To set the Flash timer (if you must enter a Flash in this string,
see flashtm in Global Parameters).
¾
Access digits before callout
These are the digits that the Voice Mail must dial for an outside line
before sending out a local or long distance Message Notification call.
Enter the digits a Subscriber dials before making a local or long
distance Message Notification call. For example, if Subscribers dial 9,
then wait for dial tone, enter 9W in this field.
DEFAULT
:
Depends on phone system
ENTRIES
:
Up to 30 digits including the codes below:
F
- Flash
W - Wait for dial tone
S - Wait for any type of sound
P - Pause (Pauses 2 sec, dials next digit)
M - Monitored pause (Pauses 2 sec, dials next digit if no
busy/reorder tone; otherwise ends call.)
A - Analyzed pause (Pauses 2 sec, dials next digit if no
busy/reorder tone; otherwise, ends call.)
NOTES
:
To set the Flash timer (if you must enter a Flash in this string,
see flashtm in Global Parameters).