Nitsuko NVM-2, Release Notes

Page: 44 / 57

Editing Parameters
40 Issue 1-0
Editing Channel Parameters
If necessary, you can edit the Channel Parameters system for the
Voice Mail System. You really shouldn't change the default values
unless advised by the Voice Mail dealer or manufacturer.
To edit Channel Parameters:
1. Start up the System Configuration Management Program (see
Chapter 1).
2. From the Main Menu, type C and press Enter.
They system prompts with the following fields.
¾
stdely Delay after dialing before analysis starts
Delay after dialing before analysis starts.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A
¾
cnosig maximum duration of silence during analysis
Maximum duration of silence during analysis.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A
¾
lcdly Delay after dial before lc drop detection
Delay after dialing digit string before drop in loop current is detected.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A
¾
lcdly1 Delay after lc drop before connection
Delay after detecting drop in loop current before establishing
connection.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A
¾
maxansr Maximum duration of answer
Delay after dialing digit string before drop in loop current is detected.
DEFAULT
:
Depends on phone system
ENTRIES
:
1-65000 (1=10ms)
NOTES
:
N/A