Nitho MLT-DP16-K, Quick Start Manual, Page: 8 / 20

PC GUIDE
1
、
The wheel is set on X-INPUT as default.
2
、
Press & hold HOME for 3 seconds to switch to D-input.
the LED will switch off and switch on again after 0.5 seconds
· X-INPUT
1
、
Connect the pedals to the wheel then connect the wheel to the SWITCH® console
2
、
After the connection has been established, the red LED on the wheel will turn on
3
、
Follow the route to activate the wheel : System Settings -> Controllers and
sensors -> Pro Controller Wired Communication -> Set to "ON"
To screenshot :
Press“SHARE” and “OPTIONS”
1
、
Enter Test interface to test buttons and axis functions
2
、
Enter Calibration interface to calibrate the axis
· TEST
The Driver is required on PC
1
、
Follow the link on www.nitho.com to download the driver :
https://nitho.com/pages/downloads
· DRIVER
1
、
Start
→
Control Panel
→
programs/Function
2
、
Find the driver you want to remove in the Interface ”current installed programs”.
Click “Remove” and follow the instructions to get the successful uninstall.
· DRIVER UNINSTALL