NITEVIZOR OWL-XTR, User Manual

Page: 5 / 18

5
OWL-XTR
...MicroSD & USB C Ports
To remove the MicroSD Card from the port, push the card slightly in using the
same thin object that was used to insert it. When the MicroSD card pops up a
few millimeters, the card can be removed with finger tips or tweezers.
Note : The rifle scope requires a high quality TF card for recording 4K HD video.
We advise to use a minimum specification of U3-V30 with 64GB or higher. The
rifle scope supports cards up to 256GB capacity.
Controls
Full Power Off
The rifle scope can be fully powered off by holding the P.OFF button for 3 sec -
onds. The rifle scope will be fully disconnected from the power supply. Use Full
Power Off when storing the rifle scope for longer periods when not in use.
Microphone
The rifle scope’s Microphone is located to the right of the P.OFF button. The
Microphone should be clean and unencumbered for optimal performance.
ON/OFF
The rifle scope can be switched On and Off using the On/Off button. Hold the
On/Off button for 3 seconds to either switch On or Off.
If the rifle scope fails to start using the On/Off button press the P.OFF button for
1 second, then pressing the On/Off button for 3 seconds.
Photo & Video Recording
Press the Photo/Video button for 1 second to switch between Photo and Video
modes. Press the Photo/Video button briefly to take a photo or start/stop Video
recording.