NITEVIZOR OWL-XTR, User Manual

Page: 11 / 18

11
OWL-XTR
...COR (Crosshair Calibration):
Step 5 : After adjusting the center of the white crosshair to the ballistic point,
press the Exit/Rangefinder button to save the crosshair setting, then rotate the
Scroll Wheel and select the preset number to be used. Press the Exit/Range
-
finder button again to confirm the setting. Select the X preset number to discard
the current adjustments.
COO (Coordination)
Up to 4 different crosshair calibration positions can be saved for use in different
environments.
Select the COO option using the Scroll Wheel then press the Scroll Wheel to
select the desired configuration.
TYPE (Reticle Style Adjustment)
The rifle scope supports any combination of four colors and eight reticles. Select
the Type option in the by using the Scroll Wheel then rotate to select the desired
reticle.
Press the Scroll Wheel to enter the color palette selection. Turn the Scroll
Wheel to select the color, then press the Exit/Rangefinder button to save.
BA (Ballistic Calculator)
Using the Scroll Wheel, enter the Menu/Settings and select BA. To select an
option to modify, press the Scroll Wheel, turn to select the value, then press the
Scroll Wheel to save.
Note : The Distance value is automatically calculated by the system. The remain-
ing values, except the defaults, can be modified.
REF (Ranging Reference Settings)
Select the REF option using the Scroll Wheel. Scroll and select the target type.
To modify the height of a target, press the Scroll Wheel for 3 seconds. A red line
will appear below the value. Rotate the Scroll Wheel to set the height then press
the Exit/Rangefinder button to save the setting.