NITEVIZOR OWL-XTR, User Manual

Page: 10 / 18

10
OWL-XTR
Operating the OWL-XTR Rifle Scope
Home Screen
When the rifle scope is switched on, the Home Screen will be displayed, com -
prising the real-time video image, a status bar at the bottom and additional
information at the top of the screen.
Menu/Settings Interface
Use the Scroll Wheel to enter the Menu/Settings Interface to adjust settings and
options.
COR (Crosshair Calibration):
Step 1 : Aim the crosshairs at the target and shoot.
Step 2 : Re-aim the crosshair at the target, enter the menu, and select the the
COR option
Step 3 : Click the Scroll Wheel, and rotate it, choosing COR. The fixed white
crosshair refers to the center of the screen. If entering this selection for the
first time, a red crosshair in the center of the screen will also be visible, which
overlaps with the white crosshair. 8X=O 8Y= 0 will be displayed which are the
current coordinate values.
Step 4 : Rotate the Scroll Wheel, to adjust the position of the white crosshair.
Move the center point of the white cross hair to the ballistic point. Push the
Scroll Wheel to switch between X-axis and Y-axis.
1. Pitch Angle
2. Electronic Compass
3.
TF Card Status
4. WiFi Status
5. Bluetooth Status
6. Battery Information
7.
Electronic Magnification Value
8. Photo / Video / Vibration Video
Status
9. Resolution Setting