niteo POJM220033, Instruction Manual

Page: 33 / 36

33
Correct and regular cleaning will improve safety and extend the lifespan of the product .
Warning! Turn the device off, disconnect it from the mains, and wait until it cools down before
cleaning or maintenance to avoid burns .
1 . Make sure the ventilation openings are not covered or clogged with anything. This is
particularly important when working in a highly dusty environment. If they are clogged, blow
them down with compressed air
2 . To remove dust from the device, do not use metal brushes etc . – wipe it with a dry cloth
instead .
3 . Do not use any chemical, alkaline, abrasive or disinfecting substances to clean the device,
as such cleansers could damage its surfaces.
4 . Be careful not to damage the internal parts of the device .
5 . It is recommended that the device be cleaned immediately after every use .
6 . Make sure no liquid gets into the device.
Caution!
Do not clean the device with any chemicals, alkali, abrasive, or disinfecting agents, as they
may damage the surface of the device.
Never immerse the device in water. Do not place the product on a wet surface.
Any irregularity noticed during operation or maintenance of the tool is an indication that
the product should be returned to the service for repair.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord
available through the service organization.
Use sandpaper with the selected gradation, adapted to the work surface. Sandpaper is available
from specialist stores .
a) Clean the device according to the instructions and leave until it is thoroughly dry . It is
recommended that the device be stored in its original package.
b) Store the device in a dry and well-ventilated place inaccessible to children .
c)
Protect the device from vibration and shock during handling and transport.
d) Use the device’s handle for holding/carrying it .
e) Carefully coil up charger power cord .
8 Cleaning and maintenance
9 Repair
10 Storage and transportation